Rear-projection home theater system
LIGHT ENGINE
Technology:: 1 x 0.95” chip DMD
Resolution:: Full HD 1920 x 1080 pixels
Lighting system:: SUPER PureLED technology
3D(*) Features:: SIM2’s PureAction 2D/3D and SIM2’s PureMovie 2D technologies
SIM2 DynamicBlack™ Technology enhanced solution (digital)
Overlap™ Technology
Contrast ratio (Full ON/OFF):: >100,000:1 with DynamicBlack™
Brightness::1000 lumens (the equivalent of 1,500 lumens(**) of lamp-based projectors)
Expected LED lifetime:: 30,000 hours INSTALLATION
Lens option (throw ratio)::0.675:1 (type ST)
Motorized Lens shift:: Not available
Digital keystone adjustment:: Vertical and Horizontal
Aspect ratio:: 4:3, 16:9 Anamorphic, LetterBox, panoramic, pixel to pixel + 3 custom-user adjustments ELECTRONICS
Horiz. & vertical scan frequency:: 15-80kHz/48-120Hz;
Color System:: PAL (B,G,H,I,M,N,60); SECAM; NTSC 3.58; NTSC 4.43
PC graphic standards:: VGA, SVGA, XGA,SXGA, UXGA, WUXGA
SDTV:: 480i/p, 576i/p;
HDTV:: 720p 50/60, 1080i 50/60, 1080p 24/50/60 + 576p
Color Space selection:: HDTV - EBU - SMPTE-C - ADOBE RGB - CINEMA INPUTS/OUTPUTS
Analog::1 x Composite Video (RCA)
::1 x Component - YCbCr/RGBs (RCA)
::1 x Graphic RGBHV/YCrCb (1x D-Sub 15 pin)
Digital::2 x HDMI (v.1.4 with Deep Color)
Control::1 x RS-232
::1 x USB (B type socket)
Miscellaneous:: 3D Sync Out
::3x OUT 12V (via DC Jack) GENERAL SPECIFICATIONS
Software control:: upgradable via RS-232 serial interface or USB
Power supply:: 100-240 VAC +/-10% (48/62 Hz)
Power consumption:: max. 370W
Projector weight:: 28 kg. / 61.7 lbs
Projector dimensions (WxHxD):: 420 x 202 x 532 mm (16.5” x 8” x 21”) ACCESSORIES
Supplied:: Installation and user manual
::AC power cords (2m- 6.6 ft)
::Backlit remote control and batteries
::EasyLED 2.0 software
Optional:: SIM2 VISUS Active glasses, Emitter (optional)(*)
::SIM2 VISUS Active glasses (additional pairs)
::SIM2 Universal Ceiling Bracket (*) A SIM2 3D emitter and glasses pack is required to initiate this feature (sold separately). (**) Takes into account Helmholtz-Kohlrausch effect where brightness rises with color saturation. LED projectors produce richer and more saturated colors, thus appearing brighter than a lamp-based display with similar measured lumen specifications. (1) ANSI Lumen Specification: This is the typical projector brightness specification found in most sales literature. This measurement allows for direct comparison with other manufacturer’s projectors. Measurements are taken in compliance with ANSI IT7.228-1997 specification.
