Single-chip DLP LED technology
LIGHT ENGINE
Technology:: 1 x chip DMD
Resolution:: Full HD 1920 x 1080 pixels
Lighting system:: PureLED technology
Special Features:: Active 3D(*) visualization
::SIM2 DynamicBlack™ Technology enhanced solution (digital)
Contrast ratio (Full ON/OFF):: >30,000:1 with DynamicBlack™
Brightness::1200 lumens (the equivalent of 1,800 lumens(**) of lamp-based projectors)
Expected LED lifetime:: 20,000 hours INSTALLATION
Lens option (throw ratio):: 1.51-2.88:1
Motorized Lens shift:: V +/-60% /, H +/-10%
Digital keystone adjustment:: Vertical
Picture size (inches diagonal):: 65-200
Aspect ratio:: 4:3, 16:9 Anamorphic, LetterBox, panoramic, pixel to pixel + 3 custom-user adjustments ELECTRONICS
Horiz. & vertical scan frequency:: 15-80kHz/48-144Hz;
Color System:: PAL (B,G,H,I,M,N,60); SECAM; NTSC 3.58; NTSC 4.43
PC graphic standards:: VGA, SVGA, XGA,SXGA, UXGA, WUXGA
SDTV:: 480i/p, 576i/p;
HDTV:: 720p 50/60, 1080i 50/60, 1080p 24/50/60 + 576p INPUTS/OUTPUTS
Analog::1 x Component - YCbCr/RGBs (RCA)
::1 x Graphic RGBHV/YCrCb (1x D-Sub 15 pin)
::1x S-Video
Digital::2 x HDMI (v.1.4 with Deep Color)
Control::1 x RS-232
::1 x USB (B type socket)
::1 x USB (Service only)
Miscellaneous:: 3D Sync Out
::1x 12V 100mA output
::1x Video OUT (monitor) GENERAL SPECIFICATIONS
Software control:: upgradable via RS-232 serial interface or USB
Power supply:: 100-240 VAC +/-10% (48/62 Hz)
Projector weight:: 12 Kg. / 26.5 lbs
Projector dimensions (WxHxD):: 365x149x441 mm (14.4”x5.9”x17.4”) ACCESSORIES
Supplied:: Installation and user manual
::AC power cords
::Backlit remote control and batteries
Optional:: SIM2 VISUS Active glasses, Emitter (optional)(*)
::SIM2 VISUS Active glasses (additional pairs)
::SIM2 Universal Ceiling Bracket (*) A SIM2 3D emitter and glasses pack is required to initiate this feature (sold separately). (**) Takes into account Helmholtz-Kohlrausch effect where brightness rises with color saturation. LED projectors produce richer and more saturated colors, thus appearing brighter than a lamp-based display with similar measured lumen specifications. (1) ANSI Lumen Specification: This is the typical projector brightness specification found in most sales literature. This measurement allows for direct comparison with other manufacturer’s projectors. Measurements are taken in compliance with ANSI IT7.228-1997 specification. Due to constant product development, specifications are subject to change without notice.
