Top design for top performances

Top design for top performances


Technology:: 1 x chip DMD Resolution:: Full HD 1920 x 1080 pixels Lighting system:: SUPER PureLED technology 3D(*) Features SIM2 DynamicBlack™ Technology enhanced solution (digital) Contrast ratio (Full ON/OFF):: >30,000:1 with DynamicBlack™ Brightness::1,500 lumens (the equivalent of 2,200 lumens(**) of lamp-based projectors) Expected LED lifetime:: 20,000 hours


Lens Throw ratio NERO 3 PLUS:: 1.51-2.88:1 (+/-5%) Lens Throw ratio NERO 3 PLUS ST (short throw zoom lens):: 1.23-1.5:1 (+/-5%) Lens shift:: V +/-60% /, H +/-10% Digital keystone adjustment:: Vertical and Horizontal Picture size (inches diagonal):: 65-200 Aspect ratio:: 4:3, 16:9 Anamorphic, LetterBox, panoramic, pixel to pixel + 3 custom-user adjustments


Horiz. & vertical scan frequency:: 15-80kHz/48-144Hz; Color System:: PAL (B,G,H,I,M,N,60); SECAM; NTSC 3.58; NTSC 4.43 PC graphic standards:: VGA, SVGA, XGA,SXGA, UXGA, WUXGA SDTV:: 480i/p, 576i/p; HDTV:: 720p 50/60, 1080i 50/60, 1080p 24/50/60 + 576p


Analog::1 x Component - YCbCr/RGBs (RCA) ::1 x Graphic RGBHV/YCrCb (1x D-Sub 15 pin) ::1x S-Video Digital::2 x HDMI (v.1.4 with Deep Color) Control::1 x RS-232 ::1 x USB (B type socket) ::1 x USB (Service only) Miscellaneous:: 3D Sync Out ::1x 12V 100mA output


Software control:: upgradable via RS-232 serial interface or USB Power supply:: 100-240 VAC +/-10% (48/62 Hz) Projector weight:: 12 Kg. / 26.5 lbs Projector dimensions (WxHxD):: 365x176x502 mm (14.4”x6.9”x19.8”) - lens and feet included


Supplied:: Installation and user manual ::AC power cords ::Backlit remote control and batteries ::Live Colors Calibration software Optional:: SIM2 VISUS Active glasses, Emitter (optional)(*) ::SIM2 VISUS Active glasses (additional pairs) ::SIM2 Universal Ceiling Bracket (*) A SIM2 3D emitter and glasses pack is required to initiate this feature (sold separately). (**) Takes into account Helmholtz-Kohlrausch effect where brightness rises with color saturation. LED projectors produce richer and more saturated colors, thus appearing brighter than a lamp-based display with similar measured lumen specifications.. (1) ANSI Lumen Specification: This is the typical projector brightness specification found in most sales literature. This measurement allows for direct comparison with other manufacturer’s projectors. Measurements are taken in compliance with ANSI IT7.228-1997 specification. Due to constant product development, specifications are subject to change without notice.